We are adding the craft to your Craft Projects.
The project was added to your Craft Projects.
This pin is pretty, adorable and fun to make - what could be better? Sparkle Fairies from Candace Jedrowicz are fun soda can crafts that also help you trim your trash. Go green and use empty, washed-out aluminum cans for your project.
- Aluminum can
- Felt pens to color the aluminum – I used purple for the wings
- 20 gauge wire, about 2 feet - I used copper
- 24 gauge wire, several feet
- Assorted seed beads
- Sand paper, fine – I used a sand sponge for double duty
- Needle tool
- 1/16″ hole punch
- Glitter glue – refer to video for use
- Assorted small gems
- Brads – I used jeweled brads on some of the designs for function and/or decoration
- Begin by cutting the top and bottom off the aluminum can – See the video for tips on how and where to cut. Trace your design on the silver side and cut with scissors.
- I used purple felt pen on the silver side of the wings. Watch the video tutorial to see the glitter glue option.
- Place the right side of your wings down on a soft surface. I used a sanding sponge. With a pencil, or other embossing tool, fill the wings with a pattern.
- Lightly sand the right side of the wings to show the embossed pattern.
- Line the top of the body up with the top of the wings and punch a hole through both pieces. Punch holes for all four limbs in the body, but not through the wings. Emboss and sand the body if desired. I used a needle tool to make a petal texture on this body. On some of my others, I jeweled the body, glittered the body and used jeweled brads for buttons on the body.
- For the limbs: Cut four 3″ lengths of 2o gauge wire. Make a loop on one end and wrap the tail around to secure it.
- Slide on some seed beads.
- Bend the unfinished end down to keep the beads on while you work and to help you slide it on the body.
- For the head: Cut about an inch of 20 gauge wire. Begin bending small loops in the middle, keeping them close together.
- This is how you’ll attach the beaded wire for her hair. This one has eight, but seven or six would work for a smallish head.
- Bend out and back in for a bit of cheek on both sides.
- Secure the ends by wrapping one end around the other. Cut off the excess wire. Cut a 3″ piece of 24 gauge wire for the facial features. Make a tiny loop in the middle for the nose.
- Wrap a slightly larger loop on both sides for the eyes.
- Attach both ends of the wire to the head just above the cheeks.
- Cut about 12″ of the 24 gauge wire for the hair. Don’t be surprised if you need more wire.
- Attach one end of the wire to the first loop on the head. I made curly hair by wrapping tiny coils of wire around a needle tool. I put on two beads, made three coils, put on two more beads and wrapped three more coils. Then I put the end of the wire back through the hole and repeated the process.This shows half of the first loop completed.
- Here’s the first loop completed and threaded through the second loop ready to repeat. Experiment with the hair. Make long strands of beaded wire and bend it for long wavy hair.
- When you have as much hair as you want, secure the end of the wire to the head and cut off the excess. You may notice as you’re making your hair that the shape of the face changes and you have to readjust your face. I like to think that the fairy is showing me how she wants to look. I think it’s especially so if the face wire moves to one side or the other. It looks as thought the fairy wants to have her face partially turned!
- Begin attaching the limbs by sliding them through the holes on the front side of the body.
- Carefully wrap each wire tail around to the front of the body without bending or tearing the body.
- Line up the remaining hole in the body with the hole in the wings and slide the tail of the head wire through both, front to back. Carefully wrap the tail around the the neck to secure the head.
- Add a pin onto the back with jewelry glue and finish with small jewels, if desired.
For a comprehensive video tutorial, check out How to Make a Soda Can Sparkle Fairy.
Your Recently Viewed Projects
Images from other crafters
Free projects, giveaways, exclusive partner offers, and more straight to your inbox!
Report Inappropriate Comment
Are you sure you would like to report this comment? It will be flagged for our moderators to take action.
Thank you for taking the time to improve the content on our site.
Tin Can DIY Wind Chime
Upcycle Your Old Household Items into Crafts
Upcycle Thrift Store Plates
Turn Broken Flip Flops into DIY Stamps
Beautiful Birdcage T-Shirt Craft
14 Creative Uses for Mesh Produce Bags
Recycled Plarn Tote Bag
Stunning Toothbrush Bracelet
Plastic Bottle Hanging Planters
Pill Bottle Crafts: Reuse Pill Bottles [11 Ideas]
- 11 Crochet Shawl Patterns: Crochet Poncho Patterns, Free Easy Crochet Patterns and More
- 12 Knitted Scarf Patterns: Fabulous Free Knitting Patterns for Beginners
- 14 Free Crochet Patterns for Babies and Toddlers
- 16 Free Crochet Hat Patterns, Scarves, and Gloves
- 22 Free Crochet Patterns: Afghan Patterns, Crochet Hats, and More
- 24 Quick and Easy Knitting Patterns
- 7 Adult Coloring Pages
- 8 Free Apron Sewing Patterns
- Easy Lace Knitting Patterns
- Quick & Easy Decoupage: 12 Fabulous Mod Podge Projects for Your Home